I was hoping that there was a quick fix (like on a pc when a disc tray won't open) but I … Would have been MUCH preferable to have written about the ‘obvious’ shortcut before detailing how to deconstruct the whole unit !! Even $39 5992 is superior. ˝Disc˝: Initiates playback of inserted disc, displays a list of Tracks / Files or the Media Filter Menu 2. If the Blu-ray disc won't be played on Blu-ray player because of the Blu-ray region codes, you can try to buy another professional Blu-ray player with region code support. But even barring that, in case of desperation, you can just hit the eject button, wait until it gets “stuck” and give it an additional help through this slot. The logic which drives this whole mechanism requires on this white position sensor, which sits in the channel and gets deflected left or right to indicate fully-clamped or fully-released. Then, three clips on the fascia have to be unclipped. If the player needs to be replaced new ones are relatively cheap and I will get one that can also play Blu-Ray discs. I could have saved myself a lot of time and grief as, in the end, only the shortcut worked for me. R&S NGM202 & a Car Fridge. Check that the disc is defective by trying another disc. Unfortunately, not even the manual seems to say anything about it – but stick a thin screwdriver into the hole, and slide to the side and the tray will unlock and eject slightly. Press 'Enter' on the remote control once 6. I decided to do my best to take it all apart and put it back together again so I can show what goes on in the drive. The player is a very compact unit, rather unassuming, light and flimsy but with a decent remote control that has “clicky” buttons. I decided to try and watch something just yesterday, and to my annoyance, the tray would not eject. I had the exact same problem. This can be done by sliding the drive’s plastic mechanism responsible for the position of the spindle and laser sled towards the right with a thin screwdriver. Keep track of your product warranty coverage, Qualify for cash-back, gifts and special offers, Please be aware that your product may differ in color from this picture, but the support information is same. – Head Cleaning Cassettes, Sony Dynamicron Durable & Excellent Quality, Week 1: DSE, Tandy, Acer, IBM, Apple, Microsoft and Sony, Week 2: Apple, SEDA, Foxtel, Global Comp. HX9903, SP9820). Just replacing a rubber belt and re-applying the lubricant didn’t make any difference for me. Power on your device. Ultimately, my attempted fix without replacing the belt was only partially satisfactory. Different model for me (BDP5100), but same issue. I’m Dirty, Wash Me! Around three or four years ago, coincident with my purchase of a 3D TV, I decided to buy a Blu-ray player. To do that, I removed two silver screws and the cross-arm that sits over the spindle area. While the “simple” lubrication didn’t quite fix the issue, it didn’t do any harm, and in time I might find myself back in there to replace the belt and fix it for good. Show more product numbers Show less product numbers. Or … perhaps read the whole article before jumping out with a screwdriver? I missed the emergency ejection slot mechanism when taking it apart – it would have been simpler if I had known, but this wasn’t even documented in the manual! If the inner surface lost traction over time, maybe the other side didn’t. Region Free Hack Method 2: convert blu-ray player to multi region (Works with most Samsung , Panasonic Blu Ray and DVD players and other players) Power on DVD Player. Introspection with a Side of Random, Quick Review: Alienware AW510M 16,000dpi RGB Gaming Mouse, Quick Review: Xiaomi Youpin NexTool Cree XHP50.2 2000lm 6500K Flashlight, Project: TSP-Scripted Battery Simulation for Keithley 2450 SourceMeter, R&S NGM202: Developing a Li-Ion Battery Model with Multi-Level Current Waveform, Review: Keeppower IMR26650 3.7V 5500mAh Unprotected Li-Ion Battery (UH2655). DVD & Blu-ray Players; Philips DVP 5990/37 tray won't open with disc inside--won't play + Reply to Thread. If the tray struggles to open or close, the O-ring may be too small. Press 'Stop' on the remote control once 3. If you press the “eject” button immediately after power-on, the tray cannot be opened. Do not get any lubricant on the rubber belt or you will regret it dearly – it will make it almost impossible to get working. - Check if the AC power cord is properly connected. Help please. The tray won't even go in all the way. I couldn’t see what the problem was but it now seems to be moving freely. Then the … The tray opens 100% of the time only after replacing the motor. Thanks! 0 Solutions. At the time, there were a few units, but the Philips BDP2180/79 was the cheapest at AU$89, which was pretty much the same price as most regular Blu-ray players. Then the fascia will slide slightly forward. Ellen As part of the cost reduction, it features only HDMI output, with coaxial for audio and LAN for data (including network media play, firmware upgrade). This is a fairly common issue with almost all tray-loading optical drives, so I decided to use the opportunity to show the insides of the player as well as the components that make up the tray-load mechanism. I haven’t upgraded to UltraHD, so I shouldn’t have to update my player. When I press the Open/Close button, a motor sounds like it is trying to open the tray, but it does not open. The dispay says load and the tray won't open : Use and Learn: Quote . Especially if you need Divx compatiblity. Try to open the disc tray. It should match the port number on the back of the TV that your Blu-ray Player is hooked into. Philips DVP5992/37 + Reply to Thread. You can't open the disc tray by pressing the “eject” button when the set is in standby mode. Thanks for your thorough description which helped me understand what I needed to do to get the tray out! - Press the STANDBY ON on the front of the DVD system to turn on the power. Select the icon to the left to expand this if it's collapsed. Quick Review: (Xiaomi) Atuman DUKA LS-1 USB Rechargeable Laser Rangefinder, Notes: Heatwave Effects on Local AC Mains Voltage, Review, Teardown: HoldPeak HP-605C 6/40A AC/DC Clamp Adapter. Wireless Card Whitelists: Breaking the HP Probook 4525s Whitelist. Press 'Shuffle' on the remote control once 4. Now at least I know what the problem is with my Philips HTS8562 player. Once everything in the loading mechanism is taken out, there aren’t that many parts to worry about. To do this, one silver screw has to be removed from near the power supply board. I have a Philips DVD Recorder / VCR - model DVDR3510V - which has been of great use over the years. Press 9 for multi-region. 28th Sep 2009 16:42 #2. Post was not sent - check your email addresses! 26th Nov 2016 13:18 #2. When reassembling the drive, ensure the peg is aligned to the channel, else the tray cannot close. Press the number of the region (ie 1 for America, 4 for Australia) 5. I have a Philips dvdr 3400 dvd player / recorder. Numbers will appear. In case the model number does not offer any results, we would like to advise you to reach out to our contact center. This is why such drives often have a symptom where they can always eject when a disc is in the drive, but become almost impossible to open when empty. Look at these two video tutorials to see how easy it can be to fix, by replacing one belt with a rubber band. The whole opening and closing procedure is powered by an electric motor. If the disc tray still does not open, simultaneously press the DISC1 + STOP + EJECT buttons. Follow these instructions to open the disc tray and remove the disc. As I had no spare belt, and had nothing to measure it with to hand, I decided just to clean off all the lubrication and reapply some bike chain oil to all gears and running areas (although silicone grease is probably the best option). 5. You can see the top and the below photos: I was able to figure it out with that shortcut you provided. Although it's pretty dependable, when it won't open, the fix could be as simple as unlocking it or resetting your Blu-ray player. Remove the two cables from the power supply board, and the whole unit should now break free of the main body. Project: Convert a Car Fridge into an Environmental Chamber? There are a few “generic” replacement belts on eBay, but it’s hard to know if it’s going to really be any better. 6. Does anyone have any idea if there is any way to get it to open? I decided to opt for a 3D capable unit, so as to have something to watch on the new TV. Without your comprehensive write up, I might have just junked the player. I was able to solve my players problem with some “belt dressing” to increase the amount of torque it exerted to open the tray. Quick Review: ZKETECH ZKE Battery Rack (4-Wire Kelvin AAA/AA/18650 Test Fixture), Experiment: Exploring Ni-MH Charging with the Keithley 2450 SMU, Quick Review: 4Tool ED20 2200lm USB-C Rechargeable 21700 Flashlight, Review: “Generic” BLD-06A/B 6L Thermoelectric 12V Car Cooler/Warmer, Teardown: H96 Mini V8 RK3228A 2+16GB “4K Ultra HD” Android 10 TV Box, Quick Review: BLM “Generic” 26650 Plastic PCB-Mount Battery Holder, Post-Mortem: Click LTMR6W3K 6W LED MR16-Replacement Globe, Review, Teardown: Bosch PLR 30 C 30m Bluetooth Laser Measure, R&S NGM202 Update: F/W V3.034 Graphical View, SCPI READ Command & More, Review: ShockLi IMR 30A 3.7V/5500mAh Unprotected 26650 Li-Ion Battery, Project: SMD Practice Kits Pt. I have one of these units and the fault was similar – partial ejecting, but the sliding tray was completely jammed and could not be removed even by pulling hard on it. Simply pushing the white lever to the RHS will unlock the latch so the tray can pull out. Then, I slid the tray out completely by pressing the two side retention tabs to let the tray move all the way out. It’s rather unwieldy to work with this assembly like this, so we must eject the tray and remove the front fascia plate. Under this lid, we see that the optical drive assembly takes up most of the space, and it’s a “bare bones” plastic unit with some of the drive electronics integrated into the smaller green PCB that contains the rest of the brains (i.e. Sorry, your blog cannot share posts by email. Attempt to open the disc tray. How To: Remove WD Hard Drive from MyBook Enclosure, Tested: Generic “Sintechi” FC1307A-based SD to IDE Adapter (SD35VC0), Mega Tech Flashback: Writable Optical Discs: MO, PD, DVD-RAM, Review: Pioneer BDR-209DBK 16x SATA Internal Blu-ray Writer, Teardown, Recordings: 1 by One Wireless Door Chime R/X QH-0031 (Quhwa QH-09D), Project: Examining Capacity of Recharged Alkaline AA Batteries, Tech Flashback: Before ATAPI CD-ROMs, were proprietary interfaces, Analysis: Optus Fetch Mighty DVR Hard Drive. A model number usually starts with letters followed by series of numbers, e.g. I suppose this is the result of minimising costs … the quality of even the basic parts may be insufficient. Check the disc's region code on the back of the DVD case. Press the “Open/Close” on the front of the player to open the disc tray. DVD & Blu-ray Players; DVD Player won't eject. Always make sure your TV is set to the correct input for the DVD Player. Leave the device unplugged for 30 seconds. Thanks again for your efforts ! I stuck a screwdriver in, but I wasn’t able to open. ; Make sure the Blu-ray Player is powered on by pressing the power button on the remote, or on the unit(if the first one doesn't turn the unit on, try the other). http://www.youtube.com/watch?v=ePb9WpEi0qs. This allows the white plastic bar to be moved from the outside, and is a form of emergency eject. For those who willing to commit time and effort, but refuse to buy a replacement belt: there is a way to extend usefulness of a worn/aged belt. The correct procedure is to press the “power on” button to turn the set on first and wait for 5 seconds before pressing the “eject” button. You can't open the disc tray by pressing the “eject” button when the set is in standby mode. The cross-arm contains a metal piece inside some plastic, whereas the spindle contains a magnet, thus by magnetic attraction, the disc is secured to the spindle. Philips DVD Player Can’t Open The Tray Repaired. Ensure the peg is within the limits when reassembling, or else the mechanism will not work. This can allow the tray to eject, although the “time-out” mechanism may try to retract the tray immediately, so you have to hit the eject button again in quick order to hold it open (or just force the tray to remain open). © Koninklijke Philips N.V., 2004 - 2021. The information on this page applies to the following models: DVP2856/94 , DVP2880/94 , DVP2850MK2/94 , DVP2850/94 . Computer Products PM941 48V to 5V Module), RoadTest Review: Vishay SiC461 microBUCK 10A Synchronous Buck Converter Reference Design, SGJPHK2017 Osaka Pt 2: Osaka Castle, Temples and Shrines, Review: Sofirn SP33 V3 3500lm XHP50.2 Flashlight w/5500mAh 26650 Li-Ion Battery, Repair: Rohde & Schwarz NGM202 Power Supply Cooling Fan, Review, Teardown: L336 Learning Infrared Remote Control (& Reviving a Dead Remote), Review: Keeppower 26650 3.7V 5500mAh Protected Li-Ion Battery (P2655C), SGJPHK2017 Osaka Pt 1: The Best Views of the City, Review: Escam PVR008 Full-HD H.265 Pan-Tilt Wireless IP Camera, SGJPHK2017 Kyoto: A Half-Day in Sagano & Arashiyama, SGJPHK2017 Kyoto: A View from Kyoto Tower & Other Random Images, Quick Review: Astrolux FT03 SST40 CW 6500K + HLY 26650 3.6V 5000mAh Li-Ion Cell, SGJPHK2017 Kyoto: Shimogamojinja, Toji, Yasaka Shrine, Doshisha University & Botanical Gardens, SGJPHK2017 Kyoto: Chishakuin, Daigoji, Enkoji, Kamigamojinja, Heianjingu, Kitano Tenmangu, Ryoanji & Shoseien, SGJPHK2017 Kyoto: Daikakuji, Eikando Zenrinji, Ginkakuji, Hiranojinja, Nanzenji & Nishi Honganji, Quick Review: Generic 4000W “SCR” Voltage Regulator, Dimmer, Motor Speed Controller, SGJPHK2017 Kyoto: Nijojo, Kinkakuji, Fushimi Castle, Fushimi Inari-Taisha, Tofukuji & Fujinomori-jinja, SGJPHK2017: The Imperial Palaces & Villas of Kyoto, Japan, SGJPHK2017: Snapshots from Singapore (Part 2), SGJPHK2017: Snapshots from Singapore (Part 1). And voila, the eject seems to work flawlessly… for now. Pressing the front open/close tray button have not effect at all. The slits in the white plastic allow for corresponding pegs in the black tilting platform to push it up into the “clamped” position, or down in the “retracted” position for eject/load. Is there anything else I can do. GC6440, 37PFL7403D or SA1300. Eject the DVD -- leave the tray open 2. There are other variations of this mechanism where a plastic tab/claw stops the tray from pulling out. Thank you! You will need to use some finger pressure to do this. 2 (1206/0805/0603/0402/SOP/SOT, HKT002 NE555+CD4017), Project: SMD Practice Kits (1206/0805/0603/SOP16/SOT-23, TJ-56-242 NE555+CD4017), Random: Farewell 2020 at Long Last? If I were to disassemble the drive again, I would use this to prop out the tray, unclip the fascia panel from the tray, thus allowing me to remove the drive from inside the unit without needing to remove the whole front face of the player. It depends, because some players need force to clamp disc inside after tray closed and to work propely. Shop Target online and in-store for everything from groceries and essentials to clothing and electronics. We have another one in the basement that I will use to test the disc. Regards, William – The Netherlands. You can switch inputs on most TVs using a button called Input, Source, or Function. If you look closely at the bottom of the unit, there is a slot which matches up with a slot on the frame of the drive. Radiofax: XSQ Guangzhou, China (South China Sea Marine Weather Forecast Center, CMA), Notes: Measuring DC-DC Converter Efficiency (feat. This machine has never got on well with non Pana DVD … 4. With the Philips BDP1502 Blu-ray player, movies never looked better. - Refer to your TVs manual for correct Video In channel selection. Thanks very much lui_gough, for your extensive explaination. Make sure your TV is set to the proper input. Open-Box: from $59.99 Logitech - G PRO X Wireless DTS Headphone:X 2.0 Gaming Headset for Windows with Blue VO!CE Mic Filter Tech and LIGHTSPEED Wireless - Black Model: 981-000906 Please choose your model based on the last 2 digits of your product number, for example RQ1280/21. It’s because of this that I had the chance to show the insides of the Philips BDP2180/79 3D Blu-ray player and take apart the loading mechanism of the drive to demonstrate its parts. With the shortcut….do you have a video…or pictures… showing how to open it manually. Thanks for letting us know – indeed, that would be the next logical step. When CD and DVD players stop working, it's usually because of the drawer not opening and/or shutting. Turn off your device. It seems to be an unfortunate ailment for many motorized tray-loading drives that their trays get stuck. (2) Blu-ray discs have region code on them. Turning the CD mechanism over, there is usually a lever that one must push to the side in order to unlock the latch. SoC, RAM, Flash, etc). The correct procedure is to press the “power on” button to turn the set on first and wait for 5 seconds before pressing the “eject” button. Your detailed text and pictures – really helpful to me. Experiment: Time to EPROM Erasure by UV Lamp & Sun? ... How can I get the dvd player's disk tray to open. I think I know what you are talking about. Each product has a unique model number. All rights reserved. As the drive’s front fascia plate is still attached and the tray would not open, the front of the unit has to be removed too. Thanks very much for the thorough write up. If the issue still occurs, power off your DVD player. The tray will pop out slightly, then you can slide the tray out and clip off the fascia by pushing it upward relative to the tray. Make sure the child lock feature is disabled. Push the info button on the remote one time. Put the rubber O-ring in place on your DVD player. The screen will flash LOCK whenever the tray tries to open, but the input won't switch back to Blu Ray, so the player is useful again. Unplug the power cord or AC adapter. As the drive’s front fascia plate is still attached and the tray would not open, the front of the unit has to be removed too. The drive bay or disc should spin down and eject within seconds. No Ethernet tho. The set needs about 5 seconds to finish the initialization process after power-on. Season’s greetings! The disc was obviously scratched so that may have been the cause, but I want to rule out a defective player. Review: Bakeey 116 Pro (Teng Jinda/LeFun Health) Smartwatch – Step, Sleep, HR, BP, SPO2 for $15? BDP9000/37 . Press the “1” on the remote control. For example, all Samsung Blu-ray players purchased in Australia are region locked and can't be unlocked. SD DVD - Upconversion is typically poor, as is most BD players. Quote . 2. There is a dvd in the player that I must return to Netflix. Now it works again. To do this, one silver screw has to be removed from near the power supply board. Page 1 of 14 Pressing eject has no effect except for the display showing 'OPEN' for 5 secs followed by 'CLOSE'. Eject the disc and make sure the disc label is facing up. If so clean the surface of the disc or use an alternative Blu-ray disc to verify. The set needs about 5 seconds to finish the initialization process after power-on. However, the DVD tray has stopped opening. When reassembling, a shortcut can be taken and the drive can be mounted into the frame without the fascia panel. The blue Philips DVD background appears on the TV screen. Prevents me from having to buy or look for a new one. A white piece of plastic slides up and down (in the image) which controls the tilt of the sled and spindle – at one end it pushes it upward so that it “clamps” onto the disc with the cross-arm that was on the top. Removing the drive in this state requires removing the three ribbons that connect the drive to the green PCB, and undoing the two silver screws near the rear. It’s increased the eject rate from virtually never to about 75% of the time. The customer sent to me this Philips DVD player (model of DVP3120K ) with the complaint of the front loading tray can’t be opened. Cannot open the disc tray of my Philips player. Guide to On-Screen Display C Home Menu When you Turn On the unit, Home Menu will appear automatically. Since the initial first few weeks, the unit’s not seen much action as watching things on a TV (centrally located) has fallen out of favour to watching video on a personal device (be it a phone, tablet or computer) and optical discs have also fallen out of favour compared to streaming. To compensate for diminished traction, decrease clamping force by increasing distance between magnet and ferromagnetic plate. Change the TV channel until you see the DVD screen. I was worried because disc got extreme rotation and I thought it loses control and will crush inside. Please check if you filled in the correct model number. Disc tray won't open on Blu-ray or home theater system The tray on your Blu-ray player is pretty critical. Results 1 to 3 of 3 ... Makes a crackling sound byr tray won't open, Can any body offer a solution? Thanks a lot for sharing. Incredibly sharp images in full HD 1080p are delivered from Blu-ray discs, while DVD upscaling offers near HD video quality. Is Blu-ray backwards compatible with DVD? The model number consists out of letters followed by numbers (e.g. - Check if the TV is switched on. When you weak magnetic force of clamp, disc just slides all over and machine doesn’t recognize it at all. After the disc tray has closed, you should be able to hear the disc spinning. Thanks Partha. Try to open the disc tray. Otherwise, press [ (HOME)]. Gonna look more into that another day, but at least the initial issue has been overcome. Check that is the proper kind of disc (MP3, Picture Disk, Standard DVD) but not Blu-Ray or HDDVD. Sorry, we did not find this product. For this CD player, the problem turned out to be a broken belt between the motor and the wheel that has the gear that opens the drawer. If trying to play a DVD disc that is a DVD-R/RW or DVD+R/RW, you'll need to refer to the DVD players documentation on compatible formats. Quick Tip: DisplayPort Display Colours Subdued? The main reason for problems in the mechanism are old dried out lubrication which results in stickiness or lack of lubrication and a stretched or worn belt along with slippery rollers. Insert the disc and listen closely by placing your ear to close to the drawer of the DVD player. Close the DVD tray I buy and sell blu ray disc players, kind of a hobby, I like to try them out and see the differences…the Philips ones are really, really good players, when their low cost is factored into it. Yeah, I thought the same, but it’s not a good idea. 1. This drives a rubber belt, which drives the black cog, which then drives the white cog. I have a bdp2185/f7….but I think it’s practically the same. I’d opened it prior to finding this post, but wasn’t sure what to do about it, frankly I had suspected a motor issue like what Sergey apparently had. The disc increases the separation between the spindle magnet and the plastic-and-metal-plate clamp, thus reducing the force required to lower the spindle-and-sled assembly. Reg.disc play.blueray will play previews but wont . 3. & Vanino Radio (Russia) (Nov 20 – Jan 21). I got a 6-channel DVD home theater system from Durabrand and every time my CD or DVD goes to the next chapter/track, it makes a popping noise. Search results for {words} ({number} products). Follow the steps below to troubleshoot this issue: 1. Philips Blu-ray Player kx2a1435672292. But it’s symptomatic of a loosening/slipping/stretched belt, and it looks like it will need to be replaced to restore full function. I wish you a joyous Grav-Mass and new year. Almost all tray load mechanisms share the same principles, although PC drives are a little more tricky to disassemble as they must be extracted from their shell first by opening up the bottom PCB side first. Blu-Ray - ok. Some other drives avoid this failure mode by ensuring the motor is geared directly to the loading mechanism without a belt, however, these tend to be noisier. The white cog needed to be in the right place. If you must have a BD player, this may be a nice choice. A stretched belt will slip earlier, thus not transferring enough torque to the mechanism to overcome the friction to “break apart” the spindle-and-metal-plate connection when it comes to ejecting. ... Next day, it won't play, and the tray won't open to let me get the disc out. Then, three clips on the fascia have to be unclipped. I found that by pushing the middle of the tray upwards as you pull, you can disengage the gears and it will slide out. It’s that thin slot, correct? It still plays older Blu-ray titles with no delay. If your Blu-ray Player can't play a good Blu-ray disc, you need to check the Blu-ray Region code on the disc. Keep pressing 9 until you see the number 9 in upper left. Note: Canton Power DDO603SA Buck Boost Module uses a Boost Converter IC? “Make sure the disc is compatible with the player”… easier said than done. Without it, you won't be able to watch any of your movies. The brown board in front is the power supply board. Sort by: Topic Popularity Date published Before you buy: Does the player support all kinds of MKV files? While the tray is loading or unloading, a channel inside the tray grabs onto the peg on the left of the piece, to stop it from engaging with the white cog until the tray is just about closed. There are a few different ways you can locate your model number: We found {number} products that are available outside your country, so local promotions may not apply. It would try to eject, making a half-clunk before stalling, timing out, and clunking again. The unit has a USB port for playing files from as well as the optical drive. As I am more used to the pinhole eject type, I totally missed that, and it would have made things a lot easier if I had noticed it. Or alternatively, you could choose to make an exact copy of the original Blu-ray disc without region code so that it can be played on the common Blu-ray player. When these get stuck, it’s almost inevitably due to poor lubrication. Choose contactless pickup or delivery today. No power. Radiofax Update: JJC Kyodo – Still Alive in 2020! Hello. Unplug the power cord for 30 seconds and then plug it back in. The Philips people say I must re-set by pulling cord from DVD player to outlet but I have a bad back and can't do this. If this doesn't work and since you do not state the model number of your DVD player, try the following: Simultaneously press the POWER + STOP + EJECT buttons. Sega World, Sony, Motor Show, Vodafone, CPGA168 or Socket 0/1/486 (Intel/AMD/Cyrix), Fujitsu MHZ2120BH FFS G1 (2.5″ 120GB 2009), Fujitsu MJA2160BH FFS G1 (2.5″ 160GB 2009), Hitachi HTS541040G9SA00 Travelstar (2.5″ 40GB 2006), Hitachi HTS541060G9SA00 Travelstar (2.5″ 60GB 2006), Hitachi HTS543232A7A384 (2.5″ 320GB 2011), Hitachi IC25N060ATMR04-0 Travelstar (2.5″ 60GB 2005), IBM 19K1552 Fireball lct (3.5″ 10.1GB 2000), IBM DPTA-372050 Deskstar (3.5″ 20.5GB 2000), IBM DTLA-307030 Deskstar (3.5″ 30.7GB 2000), Maxtor 6L250R0 DiamondMax 10 (3.5″ 250GB 2008), Maxtor 6Y120L0 DiamondMax Plus 9 (3.5″ 120GB 2005), Quantum 1080AT Fireball (3.5″ 1080MB 1995), Quantum 6.4AT EX64A024 Fireball EX (3.5″ 6.4GB 1999), Quantum Fireball Plus AS (3.5″ 20.5GB 2001), Samsung SP2514N SpinPoint (3.5″ 250GB 2007), Seagate ST3120022A Barracuda 7200.7 (3.5″ 120GB 2004), Seagate ST3120026A Barracuda 7200.7 (3.5″ 120GB 2004), Seagate ST320413A U Series 5 (3.5″ 20GB 2002), Seagate ST3250318AS Barracuda 7200.12 (3.5″ 250GB 2010), Seagate ST32531A Medalist (3.5″ 2557MB 1998), Seagate ST3320613AS Barracuda 7200.11 (3.5″ 320GB 2008), Seagate ST3320620A Barracuda 7200.10 (3.5″ 320GB 2007), Seagate ST340014A Barracuda 7200.7 (3.5″ 40GB 2004), Seagate ST34342A Medalist (3.5″ 4303MB 1998), Seagate ST360021A Barracuda ATA IV (3.5″ 60GB 2002), Seagate ST380021A Barracuda ATA IV (3.5″ 80GB 2003), Seagate ST380023A Barracuda ATA V (3.5″ 80GB 2003), Seagate ST950043AS Momentus (2.5″ 500GB 2011), Seagate ST96812A Momentus 5400.2 (2.5″ 60GB 2006), WD WD1600AAJS-00PSA0 Caviar SE (3.5″ 160GB 2007), WD WD1600BEVS-08VAT2 Scorpio Blue (2.5″ 160GB 2009), WD WD1600BEVS-22RST0 Scorpio (2.5″ 160GB 2007), WD WD2000JB-00GVC0 Caviar SE (3.5″ 200GB 2005), WD WD2500AAJS-60Z0A0 Caviar Blue (3.5″ 250GB 2010), WD WD2500JB-00GVA0 Caviar SE (3.5″ 250GB 2005), WD WD2500YD-01NVB1 Caviar RE16 (3.5″ 250GB 2005), WD WD3000JB-00KFA0 Caviar SE (3.5″ 300GB 2006), WD WD3200JB-00KFA0 Caviar SE (3.5″ 320GB 2006), WD WD400BB-22HEA1 Caviar (3.5″ 40GB 2004), WD WD400BB-60DGA0 Caviar (3.5″ 40GB 2003), WD WD5000AAKS-00TMA0 Caviar SE16 (3.5″ 500GB 2007), SD/SDHC/SDXC CID CSD Register Data Database, LG GGW-H20L Supermultiblue Media Code Support List for Firmware YL07, Opinion: Transport for NSW 26 Nov 2017 Timetable Changes, Project: Modified Car Fridge “Pro” with a PCBWay 2-Layer HASL PCB, RoadTest Review: Maxim Integrated MAX77751 USB-C Autonomous Charger IC Evaluation Kit, Radiofax Update: JFX (Japan), RBW41(?)